CBR Document Geblokkeerd

Logical identifier for the composition, assigned when created. This identifier stays constant as the composition is changed over time.

See discussion in resource definition for how these relate.

The workflow/clinical status of this composition. The status is a marker for the clinical standing of the document.

Need to be able to mark interim, amended, or withdrawn compositions or documents.

If a composition is marked as withdrawn, the compositions/documents in the series, or data from the composition or document series, should never be displayed to a user without being clearly marked as untrustworthy. The flag "entered-in-error" is why this element is labeled as a modifier of other elements.

Some reporting work flows require that the original narrative of a final document never be altered; instead, only new narrative can be added. The composition resource has no explicit status for explicitly noting whether this business rule is in effect. This would be handled by an extension if required.

Specifies the particular kind of composition (e.g. History and Physical, Discharge Summary, Progress Note). This usually equates to the purpose of making the composition.

Key metadata element describing the composition, used in searching/filtering.

Type document dat verzonden wordt, mogelijke waarden zijn:

VERWIJZING – voor alle berichten van CBR naar ZorgDomein (aanmelding, annulering en update vragenset) AUTHENTICATIE-AANBOD – Van ZorgDomein naar CBR: Aanbodindicatie en authenticatie-bericht RAPPORT – Van ZorgDomein naar CBR: Medisch rapport met of zonder inhoud (in geval van blokkering)

A categorization for the type of the composition - helps for indexing and searching. This may be implied by or derived from the code specified in the Composition Type.

Helps humans to assess whether the composition is of interest when viewing an index of compositions or documents.

This is a metadata field from XDS/MHD.

Who or what the composition is about. The composition can be about a person, (patient or healthcare practitioner), a device (e.g. a machine) or even a group of subjects (such as a document about a herd of livestock, or a set of patients that share a common exposure).

Essential metadata for searching for the composition. Identifies who and/or what the composition/document is about.

For clinical documents, this is usually the patient.

Describes the clinical encounter or type of care this documentation is associated with.

Provides context for the composition and supports searching.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

The composition editing time, when the composition was last logically changed by the author.

dateTime is used for tracking, organizing versions and searching.

The Last Modified Date on the composition may be after the date of the document was attested without being changed.

Identifies who is responsible for the information in the composition, not necessarily who typed it in.

Identifies who is responsible for the content.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Official human-readable label for the composition.

For many compositions, the title is the same as the text or a display name of Composition.type (e.g. a "consultation" or "progress note"). Note that CDA does not make title mandatory, but there are no known cases where it is useful for title to be omitted, so it is mandatory here. Feedback on this requirement is welcome during the trial use period.

The code specifying the level of confidentiality of the Composition.

The exact use of this element, and enforcement and issues related to highly sensitive documents are out of scope for the base specification, and delegated to implementation profiles (see security section).

This element is labeled as a modifier because highly confidential documents must not be treated as if they are not.

The type of attestation the authenticator offers.

Indicates the level of authority of the attestation.

Use more than one code where a single attester has more than one mode (professional and legal are often paired).

When the composition was attested by the party.

Identifies when the information in the composition was deemed accurate. (Things may have changed since then.).

Who attested the composition in the specified way.

Identifies who has taken on the responsibility for accuracy of the composition content.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Identifies the organization or group who is responsible for ongoing maintenance of and access to the composition/document information.

Identifies where to go to find the current version, where to report issues, etc.

This is useful when documents are derived from a composition - provides guidance for how to get the latest version of the document. This is optional because this is sometimes not known by the authoring system, and can be inferred by context. However, it is important that this information be known when working with a derived document, so providing a custodian is encouraged.

The type of relationship that this composition has with anther composition or document.

If this document appends another document, then the document cannot be fully understood without also accessing the referenced document.

The purpose of this identifier.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Allows users to make use of identifiers when the identifier system is not known.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.

Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension.

Time period during which identifier is/was valid for use.

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

Organization that issued/manages the identifier.

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

This list of codes represents the main clinical acts, such as a colonoscopy or an appendectomy, being documented. In some cases, the event is inherent in the typeCode, such as a "History and Physical Report" in which the procedure being documented is necessarily a "History and Physical" act.

An event can further specialize the act inherent in the typeCode, such as where it is simply "Procedure Report" and the procedure was a "colonoscopy". If one or more eventCodes are included, they SHALL NOT conflict with the values inherent in the classCode, practiceSettingCode or typeCode, as such a conflict would create an ambiguous situation. This short list of codes is provided to be used as key words for certain types of queries.

The period of time covered by the documentation. There is no assertion that the documentation is a complete representation for this period, only that it documents events during this time.

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

The description and/or reference of the event(s) being documented. For example, this could be used to document such a colonoscopy or an appendectomy.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

The label for this particular section. This will be part of the rendered content for the document, and is often used to build a table of contents.

Section headings are often standardized for different types of documents. They give guidance to humans on how the document is organized.

The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section. Most Implementation Guides will make section title to be a required element.

A code identifying the kind of content contained within the section. This must be consistent with the section title.

Provides computable standardized labels to topics within the document.

The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document. If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.

A human-readable narrative that contains the attested content of the section, used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative.

Document profiles may define what content should be represented in the narrative to ensure clinical safety.

How the entry list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted.

Sections are used in various ways, and it must be known in what way it is safe to use the entries in them.

This element is labeled as a modifier because a change list must not be mis-understood as a complete list.

Specifies the order applied to the items in the section entries.

Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries.

Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.

A reference to the actual resource from which the narrative in the section is derived.

If there are no entries in the list, an emptyReason SHOULD be provided.

If the section is empty, why the list is empty. An empty section typically has some text explaining the empty reason.

Allows capturing things like "none exist" or "not asked" which can be important for most lists.

The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.

A nested sub-section within this section.

Nested sections are primarily used to help human readers navigate to particular portions of the document.